External Monitor on the Fusion . . . .

General questions about the fusion belong here.

Moderators: parametric, Jesse, jeebustrain

External Monitor on the Fusion . . . .

Postby parametric » Tue May 16, 2017 9:12 am

This would make editing a lot easier . . . .

Check this item here: http://fusioneer.proboards.com/thread/2 ... -on-fusion

parametric
Alesis Fusions 8SSD + 6SSD/384Mb/120Gb SSD/Yamaha SY85/8.5Mb/1024kb/Yamaha MOXF6/1024Mb Flash/Akai ADVANCE61/NI Komplete10/Roland MT32/Bachmann double overstrung Baby Grand Piano/Win10 Pro/Ubuntu Mate 15.04/M-Audio MicroTrack

http://www.chrisnmiller.co.uk/Chris
User avatar
parametric
Extreme
Extreme
 
Posts: 529
Joined: Mon Aug 02, 2010 7:22 am
Location: Watford UK

Re: External Monitor on the Fusion . . . .

Postby Jesse » Wed May 17, 2017 9:05 am

Sounds like a job for Brian Allan at Sector 101 :)
Tempus & Ludwig drums, Roto Toms-Djembe, Bongo's, Ibanez Bass, Fusion8HD, SUMO300 Amps, Alesis16 Firewire mixer, AKG D112-Behringer, B2-Shure, Beta 58a mics, Win10, Audigy soundcard, Audition3 & East West Goliath sound bank
User avatar
Jesse
Site Admin
Site Admin
 
Posts: 1183
Joined: Thu Jul 07, 2005 11:49 am
Location: Wilmington, NC USA

Re: External Monitor on the Fusion . . . .

Postby Jesse » Fri May 19, 2017 9:53 pm

One key factor is possibly being limited to using a monochrome type monitor, a VGA LCD color monitor may or may not work.

I am currently researching the Fusion's display pin out's and the replacement Hantronix LCD display pin outs with a possible connection to a VGA connection by the 20 pin connection on the Fusion and/or USB to VGA.

I have ordered a USB to VGA adapter to test the Fusion, but do not have much hope in that working, although with the proper firmware it could, fingers crossed, the adapter should be here tomorrow.

Jesse
Tempus & Ludwig drums, Roto Toms-Djembe, Bongo's, Ibanez Bass, Fusion8HD, SUMO300 Amps, Alesis16 Firewire mixer, AKG D112-Behringer, B2-Shure, Beta 58a mics, Win10, Audigy soundcard, Audition3 & East West Goliath sound bank
User avatar
Jesse
Site Admin
Site Admin
 
Posts: 1183
Joined: Thu Jul 07, 2005 11:49 am
Location: Wilmington, NC USA

Re: External Monitor on the Fusion . . . .

Postby Jesse » Mon Jun 05, 2017 10:57 am

I received the USB to VGA adapter and after installing the driver for the computer it worked just fine, but since there is no way for us to install drivers for the fusion I could not get it to work on the Fusion :(

The next thing I will try is to make an adapter to connect the needed contacts from the 20 pin display connector to a VGA connector or maybe I can find a larger LCD graphics display screen.

any future discussion about an External LCD display for the Fusion should be discussed here http://www.promusicproducts.com/forum/phpBB2/viewtopic.php?f=13&t=6877
Tempus & Ludwig drums, Roto Toms-Djembe, Bongo's, Ibanez Bass, Fusion8HD, SUMO300 Amps, Alesis16 Firewire mixer, AKG D112-Behringer, B2-Shure, Beta 58a mics, Win10, Audigy soundcard, Audition3 & East West Goliath sound bank
User avatar
Jesse
Site Admin
Site Admin
 
Posts: 1183
Joined: Thu Jul 07, 2005 11:49 am
Location: Wilmington, NC USA


Return to General

Who is online

Users browsing this forum: No registered users and 1 guest